Pacrel? TPE 5000 Series
Pacrel? TPE 5000 series products are based on SEBS. They can be divided into two categories:common use and special use grade . Pacrel? TPE 5000 series possess the excellent mechanical property, ozone and UV resistance properties and excellent heat aging properties. Property indexes are as follows：
Pacrel? TPE 5000 series products are based on SEBS. They can be divided into two categories:common use and special use grade . Pacrel? TPE 5000 series possess the excellent mechanical property, ozone and UV resistance properties and excellent heat aging properties. Property indexes are as follows：
| Test Item | Test Method | 5335N | 5355N | 5375N | 5395N | 5365N-NA | 5365N-AC | 5365N-EA |
| Hardness,ShoreA | ASTMD2240 | 35 | 55 | 75 | 95 | 65 | 65 | 65 |
| Density,g/cm3 | ASTMD792 | 0.95 | 0.95 | 0.95 | 0.95 | 0.96 | 0.97 | 0.95 |
| TensileStrength, MPa | ASTMD412 | 6.8 | 9.0 | 13.6 | 15.8 | 4.3 | 9 .2 | 1.5 |
| Elongationatbreak,% | ASTMD412 | 750 | 700 | 750 | 650 | 500 | 800 | 800 |
| Tearstrength,KN/m | ASTMD412 | 16.0 | 23.0 | 35.0 | 50.0 | 21.8 | 31.0 | 26.0 |
| Processing temperature, ℃ | 170-190 | |||||||
| OtherInfo. | Products have different exteriors such as transparent,semi-transparent,natural,honed,polished series.Processing methods:injection,extrusion,blow molding,calendering,etc. | |||||||
Pacrel? TPV 6000 Series
Pacrel? TPV 6000 series products are based on EPDM/PP. The advanced dynamic vulcanization technology makes the products become the symbol of high quality thermoplastic elastomer inland. Properties indexes are as follows:
| Test Item | Test method | 6355N | 6365N | 6375N | 6385N | 6390N | 6395N |
| Hardness,ShoreA | ASTMD2240 | 55 | 6 5 | 75 | 85 | 90 | 95 |
| Density,g/cm3 | ASTMD792 | 0.95 | 0.96 | 0.96 | 0.97 | 0.97 | 0.97 |
| Tensile strength,MPa | ASTMD412 | 4.4 | 6.0 | 8.0 | 13.5 | 18.5 | 20.5 |
| Elongation at break,% | ASTMD412 | 339 | 414 | 462 | 484 | 502 | 524 |
| Tear strength,KN/m | ASTMD624 | 21.2 | 25.0 | 33.1 | 55.0 | 78.0 | 102.0 |
| Compression set,% | ASTMD395(B) | 31.9 | 32.5 | 35.0 | 38.2 | 42.0 | 47.0 |
| Brittle point, ℃ | ASTMD746 | - 60 | -60 | -60 | -55 | -50 | -50 |
| Processing temp. ℃ | 160-180 | 170-190 | |||||
Remark: The parameters here are just for reference. If you have special requirement on properties, NJOP can tailor the products separately for you. E-mail to us for more details.